Customers compare RVLG-8000 to these similar products
Products Featured in this Video
John: Hey guys. John here from etrailer.com, and today we're going to take a look at the etrailer.com landing gear set. This is designed to lift and support your fifth wheel nose when you're either parked or you're storing your camper for the winter. This year, it has an 8,000 pound weight capacity and offers a 36 and a half inch lift. It comes in… see more >
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Good news! I was able to go out to the warehouse and measure the etrailer landing gear #RVLG-8HDL for you. I found that the distance between the weld stops from the outside to outside is 17-1/2 inches and from the inside to the inside of the weld…
view full answer...To determine the best landing gear option for your 1997 Forest River Sierra you'll need to measure the where your weld-stops sit to see if there is a matching set so that you can swap over without having to cut off the old mounting brackets and…
view full answer...In order to pick out a direct replacement for the landing gear on your 2001 sunnybrook 31bwfs we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder…
view full answer...I don't have any way of determining if the Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear #RVLG-HDL will work with your 2007 Fleetwood Nitrous Hyperlite TT Toy Hauler or not, unfortunately. The Replacement Crank Handle…
view full answer...The division at Atwood that handled the jacks and landing gear was sold off to Lippert so direct replacement parts are not available. But it is likely that the gear box and motor of another brand will still fit. And yes, the gear box and motor do…
view full answer...We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…
view full answer...The Landing Gear Set w/ Handle #RVLG-8HDL that you're interested in sounds like to be a perfect match for you! This landing gear set has an overall width of 6-1/8" including the foot pad, and the legs itself measure 2-1/2" wide like…
view full answer...It could be the motor but it could also be the screw/nut inside the jack leg that is causing the problem. Since you mentioned that it is hard to crank it manually I suspect that it is likely the screw and/or nut. On jacks that have an ACME screw the…
view full answer...The Landing Gear Set w/ Handle part #RVLG-8HDL is a very common replacement. The biggest thing to check is the distance from the outside to the outside of the weld stops or inside to inside of the attachment straps to ensure that it measures…
view full answer...It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you…
view full answer...We do have motors that you can add to your landing gear. For example, the Landing Gear Set #RVLG-8000 can be operated with the manual crank #RVLG-HDL but you can also add the motor #LC142178 and switch #LG-145236 for effortless operation on your end.…
view full answer...When it comes to adding a landing gear set to your 2010 Keystone Montana Hickory The Landing Gear Set w/ Handle #RVLG-8HDL will work for you. The landing gears have a durable, black powder coated outer tube and has zinc-finished inner tubes that…
view full answer...